Equipment
Nirvana is a heat-pump specialist rather than a broad-line manufacturer: pool heat pumps and heat-cool systems are the whole catalogue. We quote Nirvana where the decision is electric heat pump versus gas, and we service Nirvana units regardless of who installed them.
Categories we install
What we put on the pad, and when it’s the right call.
01
Heaters
What it is
The heater extends the pool's usable season. Two categories: gas heaters (fast, higher operating cost) and heat pumps (slower to warm, much lower to run). Both raise water temperature to a set point.
When to call
Season is closing in September when it could be running through mid-October. Existing heater throws a fault code, will not fire, or has aged past the repair-vs-replace line.
Our install
Sized against surface area, target rise, and overnight ambient temperature. Gas: gas-line load verified against BTU draw, exhaust clearances observed. Heat pump: dedicated circuit run to the applicable NEC section, bonded to the pool's grid.
Our heaters service →
Equipment prices
Nirvana equipment, and what each model costs.
These are the equipment prices. They cover the equipment itself. Installation is quoted separately and is not part of these figures, tax is not included, and shipping may apply.
Heaters
Heat pumps15 models
| Model | Price | Product | Application | HP / THP | BTU / kW | Voltage / phase | Amps / breaker | Manual |
|---|---|---|---|---|---|---|---|---|
| FC30SF | $2,400 | Nirvana FC Heat Pump, COP 6, 120V, 27.5K BTU, Heat Only, Single-Phase, 15 to 65 gpm | Above Ground | 27,000 BTU/h @80/80/80 | 120V; Phase: 1; 60 Hz | Amps: 11.7 A; Breaker: 20 A (min–max) | Manual for FC30SF (opens in a new tab) | |
| FC45 - NIRVANA 45K ABG 220V | $1,910 | Nirvana FC Heat Pump, COP 5.7, 240V, 41K BTU, Heat Only, Single-Phase, 15 to 65 gpm | Above Ground | 41,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC45 - NIRVANA 45K ABG 220V (opens in a new tab) | ||
| FC55SF | $3,100 | Nirvana FC Heat Pump, COP 7, 240V, 56K BTU, Heat Only, Single-Phase, 20 to 80 gpm | Above Ground | 56,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC55SF (opens in a new tab) | ||
| FC60SF-6A1H | $2,880 | Nirvana FC Series Pool Heat Pump Wi-Fi 208/230V 1Ph 20/30Amp Breaker 56K BTU | 56,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 10.3 A; Breaker: 20–30 A (min–max) | Manual for FC60SF-6A1H (opens in a new tab) | ||
| FC70SF | $3,220 | Nirvana FC Heat Pump, COP 6.8, 240V, 71K BTU, Heat Only, Single-Phase, 26 to 80 gpm | Above Ground | 71,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC70SF (opens in a new tab) | ||
| FC75SF-6A1H | $3,145 | Nirvana High COP Heat Only Pump w/WIFI, Titanium, 208/230 V, Single Phase, 30 A Breaker, 71K BTU, 3/10 Warranty | 71,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 13.3 A; Breaker: 30 A (min–max) | Manual for FC75SF-6A1H (opens in a new tab) | ||
| FC90SF-6A1H | $3,590 | Nirvana FC Series Pool Heat Pump Wi-Fi 208/230V 1Ph 40Amp Breaker 84K BTU | 84,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 15.5 A; Breaker: 30–40 A (min–max) | Manual for FC90SF-6A1H (opens in a new tab) | ||
| FC85SF | $3,675 | Nirvana FC Heat Pump, COP 6.8, 240V, 85K BTU, Heat Only, Single-Phase, 32 to 80 gpm | Above Ground | 85,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC85SF (opens in a new tab) | ||
| FC105VF-6A1H | $4,105 | Nirvana Heat Only Smart Fan w/WIFI, Titanium, Single Phase, 208/230 V, 40/50 A Breaker, 95K BTU, 3/10 Warranty | 100,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 17.5 A; Breaker: 40–50 A (min–max) | Manual for FC105VF-6A1H (opens in a new tab) | ||
| FC120VF | $4,595 | Nirvana FC Heat Pump, COP 6.2, 240V, 120K BTU, Heat Only, Single-Phase, 40 to 80 gpm | In-Ground | 120,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC120VF (opens in a new tab) | ||
| FC125VF-6A1H | $4,490 | Nirvana Heat Only Smart Fan w/WIFI, Single Phase, 208/230 V, 40/50 A Breaker, 120K BTU, 3/10 Warranty | 120,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 23.7 A; Breaker: 40–50 A (min–max) | Manual for FC125VF-6A1H (opens in a new tab) | ||
| NIRVANA 140K HEAT PUMP HEAT/COOL | $5,395 | Nirvana FC Heat Pump, COP 5.8, 240V, 134K BTU, Heat/Cool, Single-Phase, 40 to 80 gpm | 134K BTU | 240V; Phase: Single-Phase | Manual for NIRVANA 140K HEAT PUMP HEAT/COOL (opens in a new tab) | |||
| FC140VF | $5,225 | Nirvana FC Heat Pump, COP 6, 240V, 138K BTU, Heat Only, Single-Phase, 40 to 80 gpm | In-Ground | 138,000 BTU/h | 240 V; Phase: Single-Phase | Manual for FC140VF (opens in a new tab) | ||
| FC150VF-6A1H | $5,105 | Nirvana 6.5 COP Heat Only Smart Fan w/WIFI, 208/230 V, 1 hp, 50/60 amp Breaker, 145K BTU, 3/10 Warranty | 1 hp | 145,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 27.5 A; Breaker: 50–60 A (min–max) | Manual for FC150VF-6A1H (opens in a new tab) | |
| PV175 | $7,275 | Nirvana PV Pool Heat Pump 8 COP 240V 175K BTU Heat Only Single-Phase 50 to 100 gpm | In-Ground | 175,000 BTU/h | 240V; Phase: Single-Phase | Manual for PV175 (opens in a new tab) |
Side-fan heat pumps5 models
| Model | Price | Product | Application | BTU / kW | Voltage / phase | Amps / breaker | Manual |
|---|---|---|---|---|---|---|---|
| NE20 | $1,330 | Nirvana NE Pool Heat Pump, COP 5.6, 120V, 19800 BTU, Heat/Cool, Single-Phase, 8.8 to 15 gpm | Above Ground | 20,000 BTU/h | 120V; Phase: Single-Phase | Manual for NE20 (opens in a new tab) | |
| NE50 | $1,995 | Nirvana NE Series Pool Heat Pump 230V 60Hz 1Ph 20Amp Breaker 45K BTU | 44,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 9.6 A; Breaker: 20 A (min–max) | Manual for NE50 (opens in a new tab) | |
| NE60 | $2,800 | Nirvana NE Series Pool Heat Pump 230V 60Hz 1Ph 20Amp Breaker 55K BTU | 55,000 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 14 A; Breaker: 20–30 A (min–max) | Manual for NE60 (opens in a new tab) | |
| NE80 | $3,500 | Nirvana NE Series Pool Heat Pump 230V 60Hz 1Ph 30Amp Breaker 75K BTU | 73,500 BTU/h @80/80/80 | 240V; Phase: 1; 60 Hz | Amps: 18.5 A; Breaker: 30 A (min–max) | Manual for NE80 (opens in a new tab) | |
| NE95 | $4,400 | Nirvana Heat/Cool Side Fan Heat Pump Ne100 98K Btu | 98K Btu | Manual for NE95 (opens in a new tab) |
Trydent6 models
| Model | Price | Product | Application | BTU / kW | Voltage / phase | Manual |
|---|---|---|---|---|---|---|
| TRYDENT TR30SF | $2,365 | Nirvana TR Heat Pump, 6.1 COP, 120V, 27,500 BTU, Heat Only, Single-Phase, 15 to 65 gpm | In-Ground | 27,500 BTU/h | 110/120 V; Phase: Single-Phase | Manual for TRYDENT TR30SF (opens in a new tab) |
| TR-45 | $2,005 | Nirvana TR Series Trydent Above Ground Heat Pump, 41K BTU, 240V / 9A, 160 lbs, 26’’ 1 speed Fan, Double Titanium Exchanger, 8,000 gallons | TR45 | Above Ground | 41,000 BTU/h | 240 V | Manual for TR-45 (opens in a new tab) |
| TR110SF | $4,025 | Nirvana TR Heat Pump, 6 COP, 240V, 108,000 BTU, Heat Only, Single-Phase, 30 to 80 gpm | In-Ground | 108,000 BTU/h | 240V; Phase: Single-Phase | Manual for TR110SF (opens in a new tab) |
| TRYDENT TR115SF | $4,025 | Nirvana TR Series Trydent Pool Heat Pump, 115K BTU, 240V, 60HZ, 1 Phase, 240 lbs, 26’’ 1 speed Fan, Double Titanium Exchanger, 25,000 gallons | FC115SF6A1HA | In-Ground | 115,000 BTU/h | 240 V; Phase: 1 Phase | Manual for TRYDENT TR115SF (opens in a new tab) |
| TR130SF | $4,500 | Nirvana TR Heat Pump, 6 COP, 240V, 126,000 BTU, Heat Only, Single-Phase, 30 to 80 gpm | In-Ground | 126,000 BTU/h | 240V; Phase: Single-Phase | Manual for TR130SF (opens in a new tab) |
| TRYDENT TR135SF HEAT/COOL | $5,105 | Nirvana TR Heat Pump, 5.9 COP, 240V, 135,000 BTU, Heat/Cool, Single-Phase, 30 to 80 gpm | In-Ground | 135,000 BTU/h | 240 V; Phase: Single-Phase | Manual for TRYDENT TR135SF HEAT/COOL (opens in a new tab) |
Sourcing
We install and service Nirvana heat pumps for residential pools across the New York metro area. As with every brand on this page, that is install and service work rather than an authorized-dealer or certified-installer relationship.
We do not claim authorized-dealer or certified-installer status for any equipment brand. Where those claims matter to you, ask; we will tell you what the actual relationship is.
Other brands we install
Hayward
Hayward covers every category on the pad: pumps, filters, heaters, salt cells, automation, lighting, cleaners. We install across the full line and service Hayward equipment regardless of who put it in.
Read more →
Jandy
Jandy's strength shows up on pads that need pumps, valves, heaters, and salt cells running from a single automation controller. We quote Jandy where an integrated build is the goal and service Jandy across the range.
Read more →
Pentair
Pentair leads on variable-speed pump engineering and on the color LED lighting category. We quote Pentair where a homeowner wants long pump life, a serious lighting spec, or an integrated automation build.
Read more →